Get peace of mind when guiding and docking your vessel with the Surround View Camera System from Garmin®. This onboard six-camera array gives the captain a 360-degree overhead view on a compatible chartplotter. Guide your boat into slips at the marina, or navigate in tight-maneuvering situations with ease and incredible awareness.

The post Surround View Camera System appeared first on Yachting.

For years, I eagerly anticipated Apple’s fall event and news of the latest iPhone release. Back then, my purchasing latency was limited to locating the website’s “buy” button, as my incumbent phone was often struggling to keep pace with new apps and software updates. Then, starting around 2015 (the iPhone 6S), I was able to start squeezing extra years out of my phones. This trend accelerated, and as of today, I still rely on my iPhone 11 Pro from 2019. To be fair, I always buy the top-end model with maximum storage, but four and a half years on, I haven’t crashed (at least not hard) into this phone’s silicone ceiling.

Multifunction displays perform different tasks than smartphones, but most marine-electronics manufacturers build MFDs with off-the-shelf componentry and, sometimes, software from the mobile-device market. This sourcing gives manufacturers options for high-resolution touchscreen displays, processors, connectivity and operating-system architecture, and it means that today’s MFDs can have longer working lives.

How we got here, however, requires a small rewind. After all, MFDs circa 2010 were different animals than today’s big, powerful displays.

“Back then, most displays were 4 to 7 inches,” says Dave Dunn, Garmin’s senior director of marine and RV sales. “A big display was 9 to 10 inches, and a 12-inch display was enormous.”

These MFDs were controlled via tactile buttons and knobs, or early touchscreen or hybrid-touch interfaces. They only tackled marine-facing applications such as chart-plotting.

Today’s MFDs excel at traditional marine tasks, but they also boast bigger glass, full video integration, touchscreen interfaces, high-speed data networks, and four- or six-core processors, opening the door to expanded job descriptions.

“Processing power has indeed increased over time, bringing with it the ability to drive higher-resolution screens,” says Steve Thomas, Simrad’s product director for digital systems. “[This] also lends itself to better integration by providing the responsiveness consumers expect.”

It also enables MFDs to perform nontraditional tasks, including streaming video from daylight and thermal-imaging cameras, tackling onboard security, controlling digital switching and, sometimes, providing entertainment. Today’s flagship MFDs also sport larger high-resolution displays, multisignal connectivity (with ANT, Bluetooth, Ethernet and Wi-Fi), embedded sonar modules, GPS or GNSS receivers, data backbones, and NMEA 2000 and HTML5 compatibility.

“NMEA 2000 protocol provides the basis of communication and is the linchpin connecting everything together for the MFD to display and control,” says Eric Kunz, Furuno’s senior product manager. Kunz adds that HTML5 compatibility allows MFDs to display and control third-party equipment via web-browser windows, sans any heavy lifting from the MFD.

Technology moves in step changes, and MFDs, brand depending, have experienced two major evolutions since 2010.

“The first was the transition from a completely closed-software architecture to something open source,” says Jim McGowan, Raymarine’s Americas marketing manager, referring to the company’s shift from a walled-garden operating system to Linux and then Android.

Others, including Simrad and Furuno, took similar steps. Garmin remains a holdout.

“We use Android, but not for marine,” Dunn says. “Will we eventually go to Android? Maybe.”

The second evolution involved hardware, with all MFD manufacturers now using mobile-device componentry.

“Suddenly, the requirements for shock resistance, heat resistance, water resistance, bright visibility and fast processing became available on a wide scale,” McGowan says. “Instead of us having to source expensive industrial or semicustom hardware that was proven but old, suddenly our system architects had multiple options to choose from that were all state of the art.”

Sourcing components became easier, yielding better MFDs, but it placed a higher premium on software. Case in point: Raymarine has released more than 30 updates, including new features, for its 2017-era Axiom MFDs.

Likewise, there’s the importance of supporting hardware as it ages. “We don’t like to leave customers behind,” Dunn says, noting that Garmin supports products for five years after they’re discontinued.

This opens the door to the fine art of good enough. Given that modern MFDs are robust, the same display—like my iPhone—can last for years, provided that its sensor network remains static. While this works for buy-and-hold customers, new sensors can dangle carrots.

For example, Furuno and Garmin unveiled Doppler-enabled radars in 2016. While older MFDs could often display radar imagery from these sensors, some customers had to refit their displays to access the best features. One can imagine automation and AI presenting similar incentives.

“AI will combine multiple facets of different sensors to create a more sophisticated and enhanced navigation experience,” Kunz says. “Look for MFDs to take a larger and larger part in overall vessel control and automation.”

Avikus, for instance, is developing its NeuBoat autonomous navigation system with Raymarine. As for Garmin, Dunn says: “There’s nothing coming in the near future, but there’s some cool stuff coming with lidar and cameras.” He’s referring to the light-detection and ranging sensors that help enable automotive driver-assist features and autonomous driving.

Future hardware and capabilities aside, all experts agree on the importance of regularly updating a vessel’s MFD to keep the operating system current and to access the latest software features. While updates are free, all four companies have adopted subscription models for cartography.

“In some ways, the marine-electronics business model is changing in the same way it is happening in the consumer-electronics industry,” Kunz says. “This will most likely lead to more of a subscription-based model for certain aspects of the market.”

While subscription models make sense for a dynamic media like cartography, it’s harder to envision this business practice extending throughout the sensor ecosystem.

“We don’t want to get to the point where people have to pay for software updates,” Dunn says, pointing to BMW’s belly-flopped attempt to charge customers fees to use their existing heated steering wheels.

New hardware, however, is a different story. “More than anything, we’re a sensor company,” McGowan says of Raymarine. “We keep offering new and improved sensors.”

Given the adoption rates of Doppler-enabled radar, there’s little question that the recreational marine market stands ready to embrace step-change sensors, so long as they come bundled with newfound capabilities—say, auto-docking or autonomous navigation.

As for my ancient iPhone, I’m again counting the days until Apple’s fall event. I just hope my next iPhone will last as long as today’s flagship MFDs.  

UI Options

Recent years have seen most manufacturers adopt touchscreen-only user interfaces for their flagship multifunction displays. This technology creates user-friendly interfaces in most conditions, but some users prefer tactile buttons when the weather sours. All manufacturers build optional external keypads or hard-button remote controls.

The post Future-Proofing Multifunction Displays appeared first on Yachting.

Garmin isn’t trying to be Apple. Dave Dunn, senior director of marine and RV sales, is clear about that: “We’re trying to be the watch that you can beat up and use every day. Our customers are adventurous.”

Still, the Garmin team kept hearing customers talk about how much easier they found it to look at an Apple Watch. “Historically, our watches had a display that was not crisp, not bright,” Dunn says. “Our customers said they liked the Apple Watch display better.”

Hence the upgraded display on the recently unveiled Garmin quatix 7 Pro. Its 1.3-inch AMOLED display is brighter and crisper than the displays on previous models, with a scratch-resistant sapphire lens so boaters don’t have to worry about banging it up.

Also new is a flashlight that was on a prior quatix model, which is now standard on most models.

“Any of our users will tell you it’s our No. 1 feature,” Dunn says. “It sounds ridiculous until you see how bright it is. If you’re walking the dog at night or going to the restroom while you’re sleeping, it comes in handy. It’s a hands-free light.”

Two new apps are also loaded into this version of the quatix. The first is Trolling Motor Remote, which lets anglers control a compatible trolling motor. The second is Fish Forecast, which is intended to save anglers the effort of searching online for general information that can indicate better days to wet a line.

“Think about an almanac; it has moon phases, time of year, all of that. It gives you a prediction about the best times to fish,” Dunn says. “All of it is right there. You’re never guaranteed to catch fish, but it tells you when the better times might be.”

Garmin also updated apps that let the smartwatch act as a remote control for chart plotters, autopilots and Fusion stereos; notify boaters about anchor drag; and show integrated tide data.

“This is designed by boaters, for boaters,” Dunn says, adding that he personally enjoys controlling a boat’s stereo from his wrist. “If you’re on a sandbar at a party and you want to change the volume or the song, you can do that from your watch. I love that feature.”  

Boater-Friendly

The Garmin quatix 7 Pro is built to let users control their whole boating ecosystem from their wrist. This smartwatch can connect to compatible chart plotters, autopilots, Fusion stereos and trolling motors, all while it simultaneously tracks personal health information and serves as a hands-free flashlight. It also receives text messages and smart notifications.

Purchase your own here: Amazon, Garmin

The post Garmin Quatix Upgrade appeared first on Yachting.

If you love nautical yarns, David Grann’s The Wager is a must-read. The nonfiction work details the account of The Wager, a sixth-rate Royal Navy square-rigger that carried 28 guns and 120 sailors. The 123-footer was part of an eight-vessel armada that, in 1741, sailed west around Cape Horn in winter, pursuing plunder. The Wager got separated. In a navigational blunder, the vessel turned north before it banked enough west. It didn’t go well.

Anyone interested in learning about how the great east-west navigation problem was finally solved should read Dava Sobel’s Longitude. Anyone interested in ensuring their own navigational accuracy, however, should cruise with a dedicated Global Navigation Satellite System sensor.

Satellite-based navigation began evolving in the 1960s. The US-built Global Positioning System—the first of its kind—went live in 1993. Today, the international Global Navigation Satellite System consists of four global satellite constellations (including GPS), plus two regional ones. While GPS continues to provide world-class service, GNSS receivers can capture this information along with data from other satellites. The best part? You probably already own several.

Navigational satellites work by broadcasting information about their identification, position, orbit and health status, along with a hyper-accurate time stamp. Receivers derive their position by triangulating with at least three satellites, with stronger (or more numerous) signals often equating to higher accuracy. Precision matters. According to the Federal Aviation Administration, if a clock aboard a GPS satellite is off by one-thousandth of a second, then the corresponding measurement error would be 1,616 nautical miles.

While there are differences between the various constellations, each system employs three distinct segments: control, user and space.

The control segment consists of one or more master land-based control stations and a global network of supporting stations. These stations monitor each satellite’s reported positions and compare reports with predictive models. If needed, operators can alter a satellite’s orbit to ensure baseline accuracy or avoid debris.

The user segment refers to any receivers listening for signals, while the space segment refers to orbiting assets.

Each of the GNSS’ four main navigation constellations contain different numbers of satellites that operate at different elevations and across different orbital planes. The US-built GPS constellation involves 31 satellites that operate at an elevation of 10,900 nautical miles above sea level. GPS satellites orbit on six different planes, and they maintain a 55-degree orbital inclination (relative to the equator).

Russia’s GLONASS constellation, which has been active since 1995, involves 24 satellites that operate at 10,315 nautical miles and orbit on three planes at 64.8 degrees of orbital inclination. China’s BeiDou constellation, which went live in 2011, consists of 35 satellites. Of these, eight are either geosynchronous or inclined geosynchronous satellites that operate at 19,325 nautical miles, while the other 27 operate at 11,625 nautical miles. BeiDou satellites orbit the planet on six planes, and they maintain an orbital inclination of 55.5 degrees.

Finally, the European Union’s Galileo constellation, which became operational in 2018, will (when complete) consist of 30 satellites that operate at 12,540 nautical miles. Galileo satellites orbit across three planes, and they maintain a 56-degree orbital inclination.

GNSS receivers are generally accurate from 6.5 feet to 13 feet globally; however, some countries use a satellite-based augmentation system (SBAS) that improves accuracy by broadcasting correction information. In the United States, this is called the wide-area augmentation system (WAAS). In early 2023, the European Union’s Galileo constellation began delivering free high-accuracy service information that’s precise to roughly 8 inches.

Celestial navigation, this is not.

Satellite-navigation receivers have existed in different forms for years. Depending on the manufacturer and design, these receivers (and their antennas) can be embedded into multifunction displays, or incorporated into abovedecks sensors that share satellite-navigation data with other networked equipment (or both).

Alternatively, yacht owners can sometimes buy an abovedecks listen-only antenna, which shares its improved signal strength and reception with a belowdecks GNSS-enabled multifunction display.

Some satellite-navigation receivers favor GPS signals, while others can also listen to data from some of the other GNSS constellations. Full GNSS receivers can access the four main constellations, plus the regional Japanese and Indian constellations. These receivers sometimes include nine-axis compasses or attitude-heading reference systems. These sensors, which don’t add much cost, provide accurate heading information in addition to GPS and GNSS data.

Finally, satellite compasses are the best option for serious navigation. Depending on their design, these instruments employ multiple GNSS receivers, which provide heading information that isn’t contingent on Earth’s magnetic field (read: high-latitude cruising). Eric Kunz, Furuno’s senior product manager, says the company’s SCX20/21 satellite compasses use four GNSS receivers, allowing them to achieve 1-degree heading accuracy.

While some people say GPS alone is plenty robust for their needs, many marine-electronics manufacturers have been quick to embrace GNSS. “With more satellites available to track and pull into calculations, the GNSS-enabled receivers offer enhanced accuracy,” says Jim McGowan, Raymarine’s Americas marketing manager.

He’s not alone in this assessment. “A GNSS antenna provides more redundancy and higher accuracy than GPS-only receivers,” says Dave Dunn, Garmin’s senior director of marine and RV sales. “Some parts of the world may have better coverage at certain times of day with some constellations than others.”

McGowan says GNSS is especially useful for high-latitude navigators because these receivers can track GLONASS satellites: “Those satellites are in a higher orbit inclination than GPS satellites, which allows the GNSS receiver to get a better tracking angle and duration on those satellites.”

Leigh Armstrong, Simrad’s product manager of digital systems, agrees: “This allows for better maintenance of accuracy in areas with less satellite coverage.”

The inverse, of course, is that BeiDou, Galileo and GPS satellites likely provide better fixes closer to the equator.

While GNSS data is critical for navigation, it can also help bolster the accuracy of other networked devices. Here, Dunn points to automatic identification system (AIS) position and speed data, autopilot performance, and radar target-tracking features.

Looking ahead, autonomous docking systems and vessels need precise position, speed and other navigational information to negotiate harbors, follow autopilot-driven courses, and safely dock. It’s expected that GNSS (with SBAS) will fill this niche.

The Wager’s crew experienced unspeakable horrors, but GNSS receivers and satellite compasses likely mean none of today’s boaters will have to dodge scurvy.

Belts and Suspenders

While the ancient mariner would have paid handsomely for a chronometer, contemporary smartwatches carry GNSS sensors. Most smartphones have GNSS receivers, as do some handheld VHF radios. These are all important backups should a vessel experience low voltage or power loss. 

The post Global Navigation Satellite System Offers Waypoint Accuracy appeared first on Yachting.

Marine technology companies and brands continue to advance in the area of systems integration, combining features and functionalities in ways that are intended to make boating easier and safer. In just the past few weeks, Raymarine and Garmin—two of the biggest players in the marine electronics space—announced new developments around this type of integration.

Raymarine teamed up with ePropulsion to let boaters display their electric-motor engine data directly on Raymarine Axiom displays, without the need for additional gateways or add-on interface boxes. This blending of systems was accomplished by combining NMEA 2000 standards for electric engines with Raymarine’s LightHouse 4.6 operating system that supports electric motor PGN messages.

The Axiom engine dashboard now allows boaters to see the ePropulsion motor’s battery level, speed, gear and estimated range. A dynamic range ring overlays on the chartplotter display, helping boaters to visualize current cruising range and optimize energy consumption. 

“It has been incredible working alongside one of the most innovative electric engine manufacturers to bring industry-first functionality to a previously under-represented class of boater,” Grégoire Outters, general manager at Raymarine, stated in a press release. “We’re confident that those who’ve adopted electric propulsion will appreciate the forward thinking of ePropulsion and Raymarine.”

Meanwhile, Garmin used its April 2024 software release to add support for the FLIR Maritime Thermal Monitoring System.

Supported features now include live display of the video feed from the FLIR camera system; audible alarms and visual alerts on the Garmin chartplotter; thermal, visible and MSX thermal/visible blending; thermal color palette selection; and custom camera naming.

The FLIR Maritime Thermal Monitoring System can monitor machinery and equipment, identifying temperature anomalies in equipment such as gas and diesel engines, generators, bearings and electrical panels. The system can give boaters an early warning about problems that can lead to equipment failure.

FLIR’s system can be programmed to provide alerts based on high-, low- or delta-temperature factors.

“Garmin’s integration with this system allows users to deploy this solution seamlessly, without needing a separate display taking up valuable helm station real estate,” said Outters, who also serves as general manager at Teledyne FLIR Maritime. “The ease of installation and use, combined with the customizability of the system allows users to tailor it to their specific needs or mission.”

Where to learn more about Raymarine and ePropulsion: go to raymarine.com or epropulsion.com

Where to learn more about Garmin and FLIR: visit garmin.com and flir.com

The post Systems Integrations Abound appeared first on Yachting.

November 29, 2014: Team Vestus Wind was racing from Cape Town, South Africa, to Abu Dhabi in the United Arab Emirates at speeds of 16 to 21 knots. The boat slammed into the Cargados Carajos Shoals, around 235 nautical miles northeast of Mauritius. The crew survived, but the multimillion-dollar race boat was destroyed.

Human error was to blame, but postmortem reports suggest that the scale of the boat’s chart displays was a contributing factor. The boat carried two multifunction displays and two laptops, but the 6.4-inch MFD screens couldn’t provide much resolution at scale.

Navigation aside, screen space wouldn’t have been an issue if the team had been racing with Garmin’s 9000 series GPSMap displays, which have up to 27 inches of high-resolution glass. Modern MFDs combine processing power, memory, data storage, touchscreen capabilities and network connectivity. Garmin’s GPSMap 9000 series adds bigger swaths of glass, better onscreen resolution and faster processors.

While these upgrades significantly enhance the user experience, the biggest innovation within Garmin’s first new flagship MFD in eight years is its four BlueNet network ports. This hardware combination, along with Garmin’s quarterly software updates, should mean significant amounts of future-proofing.

The GPSMap 9000 is available in 19- ($9,900), 22- ($11,400), 24- ($13,400) and 27-inch ($16,900) screens with in-plane switching for sunlight readability. The displays ship with tide tables and either Garmin’s basic worldwide base map or a US version that has built-in Garmin Navionics+ cartography for the United States, Canada and the Bahamas. The touchscreen-only displays can be flush- or flat-mounted, and they’re compatible with Garmin’s external hard-key remote controls.

“Despite having large screens—up to 24 inches—with the GPSMap 8400/8600 series, the requests kept coming in for larger,” says Dave Dunn, Garmin’s senior director of marine and RV sales. “4K screens have come down in cost since the 8400/8600 were developed, so we’re able to offer a 4K-resolution screen where the cost didn’t make sense in the previous generation.”

While eye-pleasing, this resolution isn’t just about aesthetics, Dunn adds: “With the content of the cartography that we’re getting today, when you add in the relief shading, you add in contour lines, you add in your tracks, your breadcrumbs—all that stuff starts to clutter. The higher resolution you have, it’s cleaner.” And you can still see all the details for navigation.

Dunn says that better screen resolution also helps anglers. Like Garmin’s GPSMap 8400/8600 series, the GPSMap 9000 displays are built to show underkeel targets and structure. Both generations of MFDs support traditional 50/200 kHz sonar, along with Garmin’s ClearVu, SideVu, Panoptix and Livescope systems, giving users the ability to acquire a massive amount of underkeel awareness.

“If you’re just looking for the bottom, it doesn’t help you,” Dunn says. “But if you’re fishing, it could be the difference of seeing several targets that are stacked up together, where otherwise it might just have been one big target because the pixel count wouldn’t allow you to draw those targets.”

That said, navigational awareness is also well-covered because GPSMap 9000 displays have Global Navigation Satellite System receivers. This allows the MFDs to acquire position fixes from four discrete navigation systems: GPS (United States), GLONASS (Russia), Galileo (European Union) and Beidou (China). The built-in wide-area augmentation system allows for accuracy to 3.3 feet.

In addition to enhancing navigation, large-format 4K displays can moonlight as screens for streaming entertainment or watching stored content. GPSMap 9000 displays also have HDCP (high-bandwidth digital content protection) distribution, allowing users to play the same content simultaneously across all networked GPSMap 9000 screens.

Garmin further designed the GPSMap 9000 to serve as computational heavy-lifters. The processors have speeds seven times faster than those in the GPSMap 8400/8600 series. “We want these to be as future-proofed as possible, so there’s way more horsepower built into them than they actually need,” Dunn says. “That also helps with integration and everything that we’re pumping into these MFDs now.”

That includes Garmin’s BlueNet network, a superhighway that hustles data at 1 gigabit per second. By comparison, NMEA 0183 and NMEA 2000 networks move data at 4.8 and 250 kilobits per second, respectively, and Garmin’s previous network moves data at 100 megabits per second. While 100 Mbps isn’t slow, BlueNet is 10 times faster.

The four BlueNet ports in each GPSMap 9000 display look ordinary, but they let users build data-intensive networks involving multiple displays, daylight and thermal-imaging cameras, radars, sonars and other instrumentation. The setup also reserves bandwidth for upcoming innovations, Dunn says: “When you think about BlueNet and what it opens up for the future, that’s really the key innovation here. It gives us a lot more opportunity to interact with more features and components on the boat than we ever have.”

Tea leaves are hard to read, but given that Garmin’s Surround View camera system already has some of the technologies for self-docking capabilities, it’s fair to hypothesize that some of the impetus for the GPSMap 9000’s powerful processors and BlueNet compatibility involves supporting higher levels of automated technology.

As for target audiences, given the sizes and costs involved, these MFDs are aimed at larger yachts. Dunn points to the owner of a 70-footer who purchased three 27-inch GPSMap 9000 MFDs, and installed two at his helm and one in his stateroom, plus smaller GPSMap 8600 MFDs on the flybridge and elsewhere.

At the same time, Dunn says, the owners of smaller boats, including center-consoles, have also been installing big-boat equipment. “Anything above about 30 feet is probably going to go to these 9000s,” he says, adding that another customer bought a 27-inch GPSMap 9000 MFD for his bay boat. “Instead of going with two screens, people are opting to go with one really large one.”

As for Team Vestus Wind, it’s hard to imagine the same scaling issues surfacing if they had been racing with 27 inches of 4K screen real estate supported by lightning-fast processors, GNSS receivers and 1 Gbps data networks. Careful navigation, of course, remains a different story.

Trickle-Down Tech

Big displays are visually pleasing, but not everyone has the physical space to accommodate a 19-inch screen, let alone 27 inches of glass. It’s easy to speculate that Garmin will build smaller GPSMap 9000 displays in the future. In the meantime, Garmin’s GPSMap 8600 series comes in 10, 12, 16 and 17 inches.

The post Garmin GPSMap 9000 Series MFD appeared first on Yachting.

Garmin Quatix7

The Garmin Quatix7 Marine GPS Smartwatch lets dad manage his day on the water with connectivity to Garmin chartplotters, easy autopilot boat control, a variety of GPS mapping features and more. This GPS Smartwatch comes in three versions: Standard Edition, Pro with a crisp AMOLED display and a Solar Edition featuring solar charging for those long summer days in the sun.

Garmin inREach Mini 2 Marine Bundle

The Garmin inREach Mini 2 Marine Bundle helps keep you in touch with pop while he’s off the grid on a boating adventure. The compact satellite communicator maintains signal on the water where cell phones won’t, includes an emergency SOS messaging system to Garmin’s coordination center and boasts a battery life of up to 14 days in 10-minute tracking mode. It also offers location sharing with loved-ones at home.

Helly Hansen Men’s HP Foil HT Sailing Shorts

If he’s got the need for speed, the Helly Hansen Men’s HP Foil HT Sailing Shorts are for him. These waterproof sailing shorts are designed for inshore racing in extremely wet conditions. They include a reinforced seat and are mesh-lined for comfort. These shorts are available in sporty navy, gray fog and black styles.

Helly Hansen Men’s Crew Hooded Midlayer Jacket 2.0

For fathers with a sailor’s soul, there’s the Helly Hansen Men’s Crew Hooded Midlayer Jacket 2.0. Originally developed as a waterproof insulation layer for sailors, this jacket is waterproof, windproof and breathable. The zipper withstands corrosion and is saltwater-resistant. The jacket is available in sleek white, gray fog, cobalt 20, red, black and navy colors.

Costa Saltbreak Sunglasses

You just can’t go wrong with a cool pair of polarized shades as a gift for dad, and these Costa Saltbreak Sunglasses are no exception. These sporty shades are available in silver, tortoise, matte black and wetlands frames, each with customizable polarized glass or polarized polycarbonate lenses.

Costa Tuna Alley Sunglasses

Named after the deep-blue Bahamian waters where the Bluefin tuna migrate north, Costa’s Tuna Alley Sunglasses combine practicality and style with plenty of customization options. These shades can be personalized to match dad’s style while he’s out on the water, from solid- white frames with blue polarized lenses to blackout frames with gray polarized lenses.

Rolex Submariner

What could be a better gift than the king of watches for a king in your life? The Rolex Submariner Date is an 18 kt. white-gold statement of deep confidence. The rotatable bezel is designed for a diver to accurately and safely monitor diving time and decompression stops.The dial’s luminescent Chromalight display allows for visibility in dark environments.

Rolex Deepsea

For gift buyers wanting to go the extra nautical mile, the Rolex Deepsea is 18 karats of bright, flashy and practical yellow gold with a Cerachrom bezel insert in blue ceramic and an oyster bracelet. This is the legendary divers’ watch, filled with luminescent material that emits a long-lasting blue glow for excellent legibility in dark conditions.

Penn Squall Lever Drag Conventional Rod & Reel Combo

The Penn Squall Lever Drag Rod & Reel is lightweight, ergonomic and corrosion-resistant. With stainless- steel gears and a high-speed gear ratio, this lever-drag is outstanding for nearshore trolling for kings and dolphins. This rod comes in medium and heavy power levels, 6- and 7-foot rod lengths as well as 15- to 30-pound and 30- to 80-pound line ratings.

YETI Tundra® 65 Marine Cooler

Help him keep his drinks cold on the water with the YETI Tundra 65 Marine Cooler. This spacious cooler can easily handle a day’s provisions for a family of four. It fits up to 77 cans or 58 pounds of ice, and the YETI Fatwall design provides 2’ of seamless insulation on the walls and bottom with 3’ of insulation on the lid.

YETI 30 oz. Rambler® Travel Mug

The YETI 30 oz Rambler Travel Mug will keep his adventure going longer. This is YETI’s biggest travel mug, providing a trip-proof grip thanks to its elevated handle. In the case of bumpy waves, its leak-resistant Stronghold lid includes dual-slider magnet technology to prevent spills.

Mustang Survival HIT Automatic Inflatable Life Jackets with Harness

The Mustang Survival HIT Automatic Inflatable Life Jacket with Harness is a boating essential and an excellent gift. This life jacket is designed for serious sailors to use in severe weather with exclusive technology that enhances safety and minimizes maintenance. Reliable automatic inflation even in severe conditions adds peace of mind to this life-saving device.

Noco Boost Pro GB150 Ultrasafe Lithium Jump Starter, 3000 Amp, 12V

The Noco Boost Pro GB150 Ultrasafe Lithium Jump Starter delivers 3,000 amps for jump starting a dead battery in seconds. It’s a powerful battery booster that doubles as a portable power source for charging USB devices or powering 12-volt devices. Perfect for dad’s car, boat, RV or truck! On top of that, the jump starter includes an ultra-bright 500 lumen LED flashlight with seven light modes, including SOS and an emergency strobe.

Fusion Marine MS-RA210 Stereo and XS Classic Speaker Kit

The Fusion Marine MS-RA210 Stereo and XS Classic Speaker Kit is a gift that will keep dad jamming while washing down the boat. Remember the Garmin Quatix7 from earlier? Advanced connectivity options give you the freedom to control this stereo from a compatible Garmin MFD, smart device or watch, making this a great gift to pair with!

Amberjack – The Loafer

It just wouldn’t be a complete father’s day gift list without mentioning some slick kicks. The Loafers by Amberjack are made with A-grade full-grain leather and sheepskin lining, and they come in a variety of colors and sizes. They are comfortable, stylish and they feature an athletic outsole with a heat-activated insole. And, after a day of cruising, they just look great when heading ashore to your favorite waterfront eatery.

The post Best Father’s Day Gifts For Boaters 2024 appeared first on Yachting.

The fall and winter boat shows mean that an armada of technology is being launched to make everyone’s time on the water safer and more fun. Without further ado, here is some of the top tech to put on your radar for the new year’s boating season.

Garmin 

Innovations in marine electronics hail from two places: hardware and software. In recent years, hardware advances have slowed compared with a decade ago. Case in point: While Garmin has long pushed the software envelope, the company’s flagship multifunction display—the GPSMap 8400/8600—premiered in 2016. Garmin’s newest flagship display, the GPSMap 9000 series ($9,900 to $17,000), brings significant hardware advances.

These advances include edge-to-edge 4K displays, processors that purportedly deliver seven times the speed of Garmin’s previous offerings, and a faster local network (Garmin BlueNet gigabit network, which can hustle data at up to 1 gigabit per second to and from peripherals, including radar and sonar modules).

GPSMap 9000-series displays are available in 19-, 22-, 24-, and 27-inch screens that ship with Navionics+ cartography and AutoGuidance+ routing. The displays also support engine-room monitoring, Garmin’s OneHelm integrated digital switching, and Garmin’s Surround View Camera System, which eases the challenges of docking. Users can control these IPX7-rated displays via a touchscreen interface, with voice commands using a headset (sold separately) or with a paired Garmin smartwatch (also sold separately).

Speaking of peripherals, Garmin also unveiled its GSD 28 sonar module, which is a dual-channel Xchirp-enabled black-box sonar that can probe depths to 10,000 feet. The GSD 28 ($3,000) can be networked to Airmar- or Garmin-built transducers, and can transmit at 300 watts to 3 kilowatts. The sonar has Garmin’s Rapidreturn, which delivers two to six times faster ping rates than previous-generation black-box sonar. Boaters who cruise with Garmin’s MSC 10 satellite compasses can also leverage the GSD 28’s Heave Compensation feature, which removes vessel motion from its returns.

Furuno 

Integration has long been a marine-electronics buzzword, but Furuno took a different tack with its FCV-600 and FCV-800 stand-alone fish finders. The sounders (call for pricing) have chirp and dual-frequency (50/200 kilohertz) capabilities, and they can explore depths to 3,937 feet.

The FCV-600 has 5.7 inches of screen real estate and transmits at 600 watts, while the FCV-800 has 8.4 inches of glass and transmits at 1 kilowatt. Additionally, the FCV-800 cooperates with NMEA 2000 and NMEA 0183 networks, while the FCV-600 uses only N2K networks.

Both fish finders are compatible with a range of transducers, and both support Furuno’s proprietary fish-finding technologies, including RezBoost signal processing, Bottom Discrimination and TruEcho Chirp, which yields better image resolution and onscreen target separation than traditional 50/200 kHz sounders. Also, both fish finders are Wi-Fi-enabled, which lets one fish finder communicate wirelessly with another identical sounder. In other words, two FCV-600s can talk, or one can communicate with select third-party apps and smartphones.

Raymarine

Sailors love wind information. Raymarine’s Alpha Series Displays and RSW Series Wind Sensors capture and present data that is user-customizable.

Alpha displays ($1,200 to $2,000) come in 7- and 9-inch screens that can be mounted vertically or horizontally at the mast or the helm. Users can customize screen views, and they can control the displays via the individual touchscreens or through networked Raymarine-built Axiom multifunction displays.

RSW Series Wind Sensors ($850) are self-calibrating, with embedded attitude-heading-reference-system sensors that measure pitch, roll and yaw. This combination allows the system to calculate true-wind metrics and present them on an Alpha Series Display.

VoltSafe

From a distance, the smartest thing about VoltSafe is the magnetic connection between an ordinary 30-amp shore-power cable and VoltSafe’s proprietary charging station. Should someone forget to disconnect before engaging the boat’s throttles, 40 pounds of load breaks the magnetic connection.

Better still, VoltSafe’s shoreside chargers use an electronic vetting process (think electric-car chargers) with the reciprocal magnetic connector. If the connection doesn’t pass muster, electricity stops (or never starts) flowing. This feature adds a significant safety margin, especially given the presence of water.

While VoltSafe systems are currently a marina-facing product, in time, users will be able to communicate with the system via VoltSafe’s app. This feature should be useful for tracking bills, tracing low-voltage issues, and receiving power-outage alerts.

OceanLED

Lighting can help set a mood, but controlling belowdecks, topside and undercarriage illuminators can be challenging. OceanLED’s OceanBridge (call for pricing) is a multizone control system that can be driven from a networked multifunction display via an NMEA 2000 or Ethernet connection, or from a smart device using OceanBridge’s built-in Wi-Fi connectivity.

OceanBridge systems can control all OceanLED lights, plus most third-party DC-powered lights. In total, the system can control 64 lights (this can be expanded to 150-plus with splitters), including color and brightness, color fades and transitions. There’s also music sync and OceanLED’s proprietary movement-to-color feature across 10 zones.

Digital Yacht

Devices enabled for the internet are handy, but they can open the door to hackers. Digital Yacht’s N2K Protect ($350) stops onboard cyberthreats by validating all equipment on an NMEA 2000 network.

After that, N2K Protect creates a baseline network map, which it stores locally. N2K Protect locks down and monitors the network 24/7/365. Users can configure the system to generate an alarm (N2K network alerts or SMS messages via a Digital Yacht 4G/5G cellular modem) if unscrupulous activity or poor N2K performance is detected. And N2K Protect is updatable via an embedded web interface.

Digital Yacht also recently unveiled its CO Alert carbon-monoxide detection and alarm system. CO Alert ($330) is a two-piece system consisting of a white-box detection sensor and a black box that tackles power supply and network connectivity. The low-draw system constantly monitors its self-test feature to ensure safety and performance. If tripped, the system generates audio and visual alarms on NMEA 2000-networked multifunction displays.

Actisense

NMEA 2000 networks move a lot of information. Actisense’s NGX-1 gateway helps boaters access this data.

Actisense makes two versions of the device: the NGX-1-USB ($280) and the NGX-1-ISO ($260). Both allow all major PC-based chart plotters to communicate with networked instrumentation, and both provide a firewall between the computer and the N2K network. The NGX-1-USB plugs into PCs, while the NGX-1-ISO is wired to an NMEA 0183 device or a serial port.

The post Top Helm Technology For 2024 appeared first on Yachting.

Few things annoy boaters more than clutter on a radar screen. The last thing a skipper needs while tracking an oncoming boat is a bunch of unwanted signals from land, birds or weather. Clutter can turn a radar screen into an indecipherable mess, making it harder than it should be to maintain situational awareness and be safe out on the water.

That’s why it’s good news to see Garmin incorporating scan averaging as a feature in its new GMR xHD3 series of open-array radars. These are the first magnetron radars from Garmin to have the scan-averaging feature, which helps filter out sea clutter and interference on the display.

“We are excited to build on the foundation of our previous open-array radars and bring more premium features that will appeal to mariners of all types,” says Dan Bartel, Garmin’s vice president of global consumer sales. “Whether you’re cruising overnight, fishing offshore or just out for the day, Garmin’s new xHD3 open-array radars look far and wide to deliver an incredibly clear picture of what’s out there, maximizing situational awareness and giving you more peace of mind every time you leave the dock.”

Additional features include target-size processing, which uses pulse expansion to help optimize on-screen object shapes for better interpretation at all range scales, and true echo trails, which display a historical trail of boats on the water, removing relative motion influence to help quickly identify moving targets and potential collision threats. For anglers who want to follow birds to the fish, the xHD3 open arrays have auto bird gain and a bird-mode preset feature.

An overlay feature on the GMR xHD3 series lets the single antenna provide split-screen, side-by-side images on a compatible chart plotter, with independent settings for close and long range. A radar overlay can also be added on top of a chart view, so skippers can see any differences between the chart and what the radar is showing.

All of these features add up to a better sense of whatever is around the boat, which, in turn, creates a safer and better boating experience overall.  

Sizing Options

The antennas are available in 4- or 6-foot versions with 4, 12 or 25 kW of power, and they have a 100-knot wind rating, which Garmin says is commercial-grade weather performance for recreational boaters. Rotation speeds are 24 and 48 rpm for fast redraw rates.

In the Zone

This series of radars lets boaters use Garmin’s Guard Zone feature on compatible chart plotters. Guard Zone helps create even more situational awareness on board, since it can alert boaters whenever an object comes within a boater-defined area around the vessel.

The post Garmin GMR xHD3 Radars See Everything appeared first on Yachting.

Black cables of different lengths hang from tines, awaiting testing. Each cable is fitted with connectors that align with hardware from all the marine-electronics manufacturers. If all goes well with the tests, then packaging and shipping are next.

While it’s odd to see just-minted cabling for Furuno, Garmin, Humminbird, Raymarine and Simrad on the same factory floor, that’s how this place works. Since its founding in 1982, Airmar Technology Corp. has ensured that its transducers play nicely with third-party fish finders, sonars and multifunction displays. As Craig Cushman, Airmar’s director of marketing, explains by analogy: “We don’t build marine electronics. We build high-end speakers.”

In 1982, engineer Steve Boucher founded Airmar in Milford, New Hampshire, with the goal of innovating and manufacturing better acoustic-sensing transducers. The company’s first product was a transom-mounted transducer that worked with a variety of fish finders. Today, Airmar makes everything from proximity sensors to acoustic rain sensors to flow sensors to high-end chirp transducers. The common denominator in all this product diversity is Airmar’s expertise in sonar and ultrasonic-sensing technologies. The company is the leading global manufacturer of high-end transducers.

Since its founding, Airmar has produced both branded and white-label products for third-party companies. This arrangement has freed marine-electronics manufacturers to pursue their own areas of expertise, and has let Airmar form close-knit partnerships to produce transducers that are critical to many big players’ products.

Just as Airmar grew its product portfolio from a humble, transom-hung transducer to sensors that now govern bottling plants and Chicago city buses, the business has also grown to include multiple other companies. These include Marport, which manufactures sensors, echo sounders, current profilers and sonars for the commercial-fishing market; Gemeco and Airmar EMEA, both distribution companies; and a defense-contracting operation. Roughly 60 percent of Airmar’s annual revenue flows from the recreational-marine market; the other 40 percent, including some defense contracting, provides stability in other markets. Airmar is supported by 435 global employees, including some who report to offices in France, Iceland and South Africa, while 275 to 300 employees work at (or remotely from) the company’s New Hampshire headquarters.

I visited that headquarters, which is sizable with three buildings. Cushman and Susan Leuci, Airmar’s media-relations specialist, started my tour by showing me a few pieces of Airmar-built equipment, including two small paddle wheels.

“That’s our new Gen2 paddle wheel,” Cushman says, adding that it delivers accurate speed-over-water metrics at boat speeds as skinny as 0.3 knots. “A young engineer and University of New Hampshire graduate spent three years perfecting that design.”

The wheel has a precise, asymmetrical shape, and a large surface area relative to its size. There’s little room for marine growth to accumulate compared with previous offerings.

“We made that here,” Cushman says, adding that while Airmar’s injection-molding machines can rapidly fabricate components, manufacturing here is still largely a manual process. “We’re not feeding components into a machine. It’s a manual, hands-on job. A lot of craftsmanship goes into these transducers.”

Downstairs on the factory floor, in the engineering lab, new designs are being fabricated before testing commences in the adjoining research-and-development room, which is populated with racks of testing equipment and multiple freshwater tanks. Inside one tank, a wooden structure hangs vertically in the water column. The wood is cut at different and diverging angles, which allows Airmar to test for sonar-wave reflexivity. Nearby, there’s a bench with fish finders from all the major brands. Cushman explains that Airmar tests new transducers on all platforms, just like a high-end speaker company might test its creations on receivers from all the major brands.

“We’re a technology-development company, not a boating company,” Cushman says. “We attract people because of the technology, not necessarily because it goes on a boat.”

Around the R&D room, there’s equipment for hot-and-cold cycling, drop testing and atmospheric-pressure testing. No amount of pounding into offshore seaways will approximate the level of torture that Airmar conjures here.

On the main factory floor are more tank-testing facilities and multishelf wheeled carts full of transducers ready for packaging and shipping. Their housings might be bronze, molded plastic, stainless steel or urethane, but inside, each contains at least one carefully potted piezoceramic element.

“Everything is 100 percent American-manufactured,” Cushman says. “We have some circuit boards made in Canada, but everything is assembled here, in the USA, in New Hampshire.”

Cushman leads me past the area where employees batch-test incoming componentry, before taking me into the room where other employees pour encapsulating material into transducer bodies. He says that while all Airmar employees receive months of instruction and on-the-job training, encapsulation work requires special experience to ensure that air bubbles and other contaminants don’t become suspended in the matrix.

“We have decades of research into materials that perform better in certain ways,” Cushman says, adding that a big part of Airmar’s quality comes from knowing which materials will direct the highest percentage of acoustic energy into the water column by eliminating unwanted noise.

We pass keg-like barrels filled with water and through-hull transducers, clamps and wires (and occasional rubber duckies). Rows of three-story carts hold bronze through-hull transducers, their pipe stems forming a miniature copper-colored forest.

At the ultrasonic-weather-station department, several wind tunnels occupy an end of the factory floor. They can produce winds up to 100 knots. The fans are silent as we walk by, but an engineer is preparing to test an Airmar-built weather station with an ultrasonic anemometer.

Across the street, in Airmar’s newer building, the company produces high-volume, lower-cost transducers and plastic parts, and assembles wire kits. Entire pallets of wire, wound around massive wooden spools, are ready to be cut and fitted with Airmar-built third-party connectors. “Every transducer build needs miles of cables,” Cushman says.

I couldn’t help but notice, in Cushman’s office, a half-hull of Reliance, the Nathanael Greene Herreshoff-designed behemoth that successfully defended the 1903 America’s Cup. Equipment from different marine-electronics companies is on a nearby bookshelf. Much like how Reliance dominated its field of play in its day, Airmar dominates the high-end transducer business.

The real winners, of course, are yachtsmen worldwide.

Military Service

While Airmar’s transducers detect fish, the U.S. Navy stalks submarines. MSI Transducers builds bespoke and semi-bespoke transducers for commercial and defense use. Airmar acquired MSI in 2016 and introduced high-volume manufacturing. This arrangement helps MSI be cost-competitive and gives Airmar access to next-generation technologies.

The post Behind the Scenes with Airmar Technology Corp. appeared first on Yachting.